Product Overview:

The device is Ethernet IEEE802.3 media transceiver to achieve media conversion or extending network transmission distance between two kinds of media, which are 10/100Base-T UTP and 10/100Base-FX or 10/100Base-T UTP and 10/100Base-FX. It mainly used for fiber network far distance (20/40/60/80/120km) transmission, supports 10/100M or 10M, 100M transmission rate. Fiber port and UTP can work through 10M or 100M rate.

Features:

1,Single-mode, multi-mode, WDM Bi-direction types are available,internal and external power optional;

2,Fully complies with IEEE802.3 10Base-T, IEEE802.3u 100Base-TX/FX standard;

3,Auto-negotiation of 10/100Mbs rate and Auto-MDI/MDIX for TX port;

4,Auto-detection of half/full duplex transfer mode for TX port;

5,Provide switch configuration of half/full duplex transfer mode for FX port;

6,The Ethernet interface supports jumbo frames (1600bit), which can match with the switch product complied with IEEE802.10 protocol;

7,Support the LFP (Link Fault Pass Through) function ,when the fiber used connecting transceiver and UTP has fault, transceivers will notify the other end indicating fault information;

8,With Fiber Alter function, that is, after not receiving optical signal automatically cut off optical circuit (opened on network management);

9,Support FX half/full duplex and link fault alarm function switch optional;

10,Support UTP cross connection switch optional, convenient for system debugging and setup;

11Low power consumption, Low heating, can be stable work for a long time.           

Technical parameters: